This is a late 1960s rangefinder camera from the German firm of Voigtländer – who were owned by the Carl Zeiss Stiftung. This camera very much resembles my Zeiss Ikon Contessa LKE although it has fewer features.
The camera itself has the name Voigtländer on it in a couple of places but the instruction sheet (a large, single piece of folded paper and in no way a booklet) is clearly titled Zeiss Ikon Voigtländer. Although the Carl Zeiss Stiftung had a controlling interest in Voigtländer since the 1950s, it was only in the late 1960s that Carl Zeiss amalgamated Zeiss Ikon and Voigtländer into one manufacturer.
- apertures: ƒ/2.8 to ƒ/22
- focus range: 3 feet to infinity
- lens fitting: fixed
- shutter: Prontor 300
- speeds: 1/30, 1/60, 1/125, 1/300
- flash: PC socket, X synch
- film size: 35 mm
The name of this camera – Vitoret – indicates that it is a derivative of the folding Vito camera of the late 1940s. The Vito range developed over 20 years or so into a range of quite sophisticated cameras – Vito B, and Vitomatic in the 1950s, Vito C, CLR and Vito Automatic in the 1960s. The D part of the name indicates a light meter – I do not know what the D stands for as the German for a light meter is Belichtungsmesser or Lichtmeter. The R indicates a built-in rangefinder.
The body is made from die-cat aluminium alloy and the top and bottom plates appear to be made from aluminium sheet. The body is covered with black leatherette and the edge of the camera are painted gloss black. The opening back is made from pressed steel and is also covered with black leatherette. The camera measures 125 by 88 by 70 mm. It weighs 538 g. This is the late model Vitoret DR with square corners – there was an earlier model with a more rounded look. The Vitoret range was introduced in about 1963 with the Vitoret D. The version with square corners was introduced in 1966 and seems to have been continued up until Zeiss Ikon ceased production in 1972. The general appearance is very similar to the Zeiss Ikon Contessa LKE.
The top plate is sparse – at least compared to most SLR cameras. On the far right is a knob for controlling the light meter. This is not a coupled meter and you need to manually transfer the setting to the shutter and aperture. This meter is a selenium meter so it has no need of a battery – there is a disadvantage to selenium meters in old cameras as the selenium sensor can deteriorate over time if left exposed to light but if the camera is stored in its case or a dark cupboard that is unlikely to be a problem. On my camera, the meter is completely dead, which is likely to be a problem with the electronics rather than the selenium sensor.
To use the meter, you first need to set the film speed using the inner perspex disc. This can be set between 12 DIN/12 ASA and 36 DIN/3200 ASA. Having set the film speed, you now turn the outer ring to move the red pointer in the light meter window until it is superimposed on the meter’s white needle. You then read off the aperture (black numbers) and shutter speed (white numbers) combination that suits you. The meter was made for Voigtländer by Bewi who made meters for a number of German camera makers as well as for theirselves.
Central on the top plate is a Barnack accessory shoe – no electrical contacts so a cold shoe. Just to the right of this accessory shoe, near the rear of the top plate, is a small (3mm diameter) chromed button. this is the release button to allow the film to be rewound. It is necessary to keep this button depressed the whole time that you are rewinding the film.
Left of the accessory shoe is the maker’s and model name embossed in the metal. On the far left of the top plate is the rewind crank – this is the ubiquitous small folding crank. As well as rewinding the film, this crank lifts up to facilitate inserting and removing the film cassettes.
On the back of the top plate, towards the left, is the viewfinder eyepiece. This measures 20 by 14 mm and incorporates the rangefinder eyepiece. There are bright lines, 14 by 9 mm, bounding the image area. As this is not an SLR, there is no focus screen. The image is tinted pink. In the centre of the image is a pale green diamond – this is the rangefinder spot. The pink image and green spot makes the rangefinder easy to use. Just below the the top plate, on the right, is the film advance lever. This moves through 225º to advance the film by one frame but this can also be achieved with several short movements.
On the front of the top plate is a rectangular chrome bezel which measures 83 by 20 mm. On the right of this bezel is the viewfinder window. This measures 25 by 15 mm. Centrally, there is a black rectangle with a clear diamond. This is the rangefinder window. The centre of this diamond window is 30 mm from the centre of the viewfinder window. The larger this distance, the more sensitive the rangefinder will be. 30 mm is quite respectable. On the far left of the chrome bezel is the knobbly light meter sensor window.
Below the top plate on the front is the shutter/lens assembly. The shutter is a Prontor 300. this has a restricted range of shutter speeds: 1/30, 1/60, 1/125 and 1/300 plus B. This range, restricted as it is, will be fine for the photographers attracted to this camera. Apertures are from ƒ/2.8 to ƒ/22 which is a very usable range. There are five blades in the iris diaphragm giving a pentagonal aperture – the effect of this on the bokeh will be seen with the test film.
The lens is a Color-Lanthar which appears to be a triplet. Its focal length is 50 mm which is usual for this type of 35mm camera. The ‘Color’ part indicates that the lens is designed for colour photography. This might be taken for granted today but the vast majority of photography in the 1960s and earlier was black and white. The ‘Lanthar’ part indicates that the lens uses glasses containing Lanthanum – a rare earth metal that gives the glass a high refractive index allowing for ‘stronger’ elements to the lens. Lanthanum glass also has low dispersion which means that the different colours of light behave the same as they pass through the lens resulting in less chromatic aberration. The use of Lanthanum improves the quality of the lens but this lens is a triplet – only three glass elements – which reduces the quality of the lens. Other triplet lenses I have used have been quite good when stopped down to ƒ/8 and I expect this lens to be the same. The test film will show for sure.
Focal range is from just short of 3.5 feet (I suspect that it is actually one metre but this is an export camera and the scale is in feet) to infinity. There are distances marked by a red dot (close to 4.5 feet), a red triangle (between 9 and 12 feet) and a red circle (short of 60 feet. These are Happy Snapper settings for portraits, groups and landscapes respectively. These are intended to be used with an aperture of ƒ/8. I can tell this aperture by setting the red circle to the focus index and looking at which aperture is against infinity on the depth of field scale – it is ƒ/8.
This depth of field scale sits between the shutter speed scale and the focus scale. It consists of two aperture scales, one either side of the focus index, with the widest aperture nearest to the index. To establish the depth of filed for your settings, you look at the focus distance against each of the aperture values that you have set. An example: you have set your aperture to ƒ/11 and you are focused at 8 feet. The two distances against ƒ/11 are 6 feet and twelve feet so everything between six and twelve feet will be in focus.
To the left of the lens is the shutter release. This is a vertical slider rather than a button. These became common in the 1960s but I have never liked them as they require a different grip on the camera. In order to attach a standard cable release there is a threaded hole on the bottom of the slider. Below the shutter release slider is a chrome PC socket for flash connection.
The base of the camera has a standard tripod socket – 1/4 inch Whitworth I would think at this age. This socket is in line with the centre of the lens. Just in front of the tripod socket is the camera serial number – 843072. All my other Voigtländer cameras lack a serial number, their place being taken by the lens serial number. This camera’s serial number is shorter than Voigtländer’s lens serial number.
Also on the base plate is the frame counter. Unlike earlier Voigtländer cameras, this frame counter counts up. Every third frame has a number, the intermediate frames being dots. The counter counts up to 36. The counter is automatically reset to -2 by opening the back.
To get inside the camera, there is a catch on the left-hand edge of the camera. To open the back, you must squeeze the top and bottom of the catch and the back will pop open. The back itself has a rather small pressure plate and a small chrome roller to keep the film against the sprocket shaft.
The film cassette goes on the left – the rewind crank holds the cassette in place and needs to be lifted to either insert or remove the cassette. The film gate is no larger than necessary and smaller than in most 35mm cameras. To the right of the film gate is the sprocket shaft. The rôle of this is to count the sprocket holes in the film as it passes the film gate to ensure that exactly one frame is advanced each time – eight holes to one frame. The take-up spool is nice and wide – this means that the film is not curled too tightly on the take-up spool. With some cameras, a thin take-up spool means that the film will not lie flat for printing or scanning. There are four slots on take-up spool which are nice and wide and make it easy to fit a new film.